PCB Allegro proofing when these matters need to pay attention

2024/01/05

Usually businesses do.PCBBefore mass production, small samples are produced for testing, which is what we often say.PCB fast proofing. At present, there are many manufacturers specializing in PCB proofing, and enterprises can choose suitable PCB manufacturers to cooperate according to their own product needs. So, do you know what you need to pay attention to in the rapid proofing process of PCB board:

1. attention to PCB proofing quantity

For enterprises with relatively large demand, a batch of PCB samples used for testing also occupy the cost of enterprises, especially for enterprises with large types and large quantities. PCB proofing and testing costs are also relatively high. Enterprises can also reduce some production costs by paying attention to PCB proofing quantity.

2. Attention Confirm Device Packaging

The chip that has a specific function on the PCB board welding is packaged with a shielding cover, which is a process in the PCB board manufacturing process. In the process of rapid proofing of PCB boards, enterprises should pay attention to whether there is wrong welding of internal chips and electronic components during packaging to ensure the quality of PCB proofing, so as to be able to normally detect functions and mass production of PCB behind.

3. attention to do a comprehensive electrical inspection

After completing the rapid proofing of the PCB board, the enterprise should conduct a comprehensive electrical inspection of the template to ensure that every function and every detail of the circuit board meets the expected effect. Ensure that there is no or very little defect rate in subsequent mass production.

The above is the PCB board fast proofing need to pay attention to a few things, I hope to do PCB proofing for you in the future to help.

Related News

05

2024/01

CAM Engineer's Questions about Design Data

1.99SE and DXP software design, the board frame has GM1 layer and keepout layer, cam engineers will choose one of them as the board frame layer, if the two layers are inconsistent, engineers will propose EQ, especially the fixed screw holes, GM1 layer and keepout layer often appear inconsistent. Occasionally there will be extra 2D lines.

05

2024/01

Characteristics of circuit board three anti-paint

Three anti-paint is a special formula of paint, used to protect the circuit board and its related equipment from bad environment, so as to improve and extend their service life, to ensure the safety and reliability of the use. Under realistic conditions, such as chemical environment (fuel, coolant, etc.), vibration, high dust, salt spray, humidity and high temperature, the circuit board may produce corrosion, softening, deformation, mildew and other problems, resulting in circuit board circuit failure. The three-proof paint is applied to the exterior of the circuit board to form a light and flexible film with a thickness of about 25-50 microns. It can protect the circuit from damage under the above harsh conditions.

01

2023/12

PCB Allegro proofing when these matters need to pay attention

Usually, enterprises will produce small samples for testing before mass production of PCB, which is what we often call rapid proofing of PCB. At present, there are many manufacturers specializing in PCB proofing, and enterprises can choose suitable PCB manufacturers to cooperate according to their own product needs. So, do you know what you need to pay attention to in the rapid proofing process of PCB board: